|
|
Home > Product > Reverse Osmosis Membrane |
|
|
|
|
Even after the tap water resources are treated, it may still contain contaminants.
CSM RO element is the answer for delivering clean running water to your home or business by effectively removing chemical & biological contaminants.
|
|
|
Model |
Flow Rate (GPD,m3/d) |
Salt Rejection |
Dimensions |
Test Conditions |
PDF |
Diameter |
Length |
RE4040-TE(N) |
2,400 (9.1) |
99.5% |
4.0" |
40" |
40" BW Standard |
|
RE4021-TE |
1,050 (4.0) |
99.5% |
4.0" |
21" |
21" BW Standard |
|
RE2540-TE(N) |
800 (3.0) |
99.5% |
2.5" |
40" |
40" BW Standard |
|
RE2521-TE |
300 (1.1) |
99.5% |
2.5" |
21" |
21" BW Standard |
|
RE4040-TL |
2,600 (9.8) |
99.0% |
4.0" |
40" |
40" LP Standard |
|
RE4021-TL |
1,050 (4.0) |
99.0% |
4.0" |
21" |
21" LP Standard |
|
RE2540-TL |
850 (3.2) |
99.0% |
2.5" |
40" |
40" LP Standard |
|
RE2521-TL |
300 (1.1) |
99.0% |
2.5" |
21" |
21" LP Standard |
|
|
|
(N) Elements approved by NSF/ANSI standard 61
* Test Conditions
- 40" BW Standard : NaCl 2,000 mg/L, Pressure 225 psig (1.5 MPa), Temp. 25 oC (77 oF), pH 6.5~7.0, Recovery 15%
- 21" BW Standard : NaCl 2,000 mg/L, Pressure 225 psig (1.5 MPa), Temp. 25 oC (77 oF), pH 6.5~7.0, Recovery 8%
- 40" LP Standard : NaCl 1,500 mg/L, Pressure 150 psig (1.0 MPa), Temp. 25 oC (77 oF), pH 6.5~7.0, Recovery 15%
- 21" LP Standard : NaCl 1,500 mg/L, Pressure 150 psig (1.0 MPa), Temp. 25 oC (77 oF), pH 6.5~7.0, Recovery 8%
*The above characteristics may change depending on performance improvements
*The given performance statistics were attained by running them under controlled test conditions and results may vary according to different sites and regions |
|
|
|
|
|
|